A:1. Reduce power usage inverter.
2. Contact technical support.
A:1. Allow the system to rest for 1 hours before using it again.
2. Contact technical support.
A:1. Reduce power usage.
2. Observe if the ambient temperature is too high. It is recommended to keep the ambient temperature below 45℃.
3. Allow the system to rest for 6 hours before using it again.
4. Avoid frequent high-power charging and discharging.
5. Contact technical support.
A:1. Observe if the ambient temperature is too low. It is recommended to keep the ambient temperature above 10℃.
2. When a low-temperature discharge occurs, it indicates that the heating is not functioning properly. You should check the status of the current battery's heating relay and whether the SOC (State of Charge) is less than 10%.
A:1. Stop using and contact technical support.
2. Keep the battery away from heat sources when using.
A:1. Stop using and contact technical support.
A:In general, batteries are usually stacked in sets of two or four wooden crates on a pallet. When disassembling, an electric forklift is used to move the upper layer of crates to the ground.
A:The correct method is to release the metal buckle at the connection point between the wooden crate and the pallet, rather than at the top cover. The entire top cover, along with the side panels of the wooden crate, should be removed to smoothly take out the battery.